THERMOCOAX ISOPAD heating cables are made for a wide variety of industrial, commercial and residential applications. . By offering an array of cable technologies ---such as self regulating, power limiting, mineral insulated, skin effect, constant wattage and series resistance—our heating cables can meet the needs of most applications including process temperature maintenance, pipe freeze protection, longline heating, flow assurance, hot water temperature maintenance, roof and gutter de-icing , surface snow melting, frost heave prevention and floor heating
Isopad FROSTGUARD is is a self-regulating cut-to length heating cable for frost protection cable for pipes and low process temperature applications in non-hazardous areas. The small geometry, yet robust, cable adjusts its power output dependent upon ambient temperature. Therefore more heat is generated automatically when needed and less heat in
Isopad IT-ACM heating tape is specifically designed in conjunction with major motor manufacturers to prevent condensation within rotating electrical equipment, such as electric motors, generators, and even large shipboard alternators. The tapes are particularly useful on motors which operate in damp or wet conditions. They offer a low-cost, easily installed
FG220 is a parallel circuit, medium powered constant output tracer that can be cut to any length. FG220 incorporates a high temperature silicone rubber outer insulation that provides an extremely flexible and versatile heating cable that is suitable for a variety of applications. It is designed for high temperature process
Isopad IT-ITW/SS-M is a factory-terminated heating tape having a go-and-return series-resistance heating element insulated with a PTFE sheath covered with a stainless-steel braid complete with M20 gland.
Isopad IT-GW 27 is a factory-terminated heating tape constructed from a PTFE electrical insulated resistant wire extruded in silicone rubber. The construction means it is suitable for use in wet environments. The outer jacket is smooth and may be washed down for cleaning, which also makes it suitable for use
Isopad IT-SiS10 is a preterminated, flexible, and waterproof silicone insulated heating tape of the highest quality. It is manufactured according to the latest safety-technology regulations. Four silicone insulated heating conductors are embedded in a protective overbraid made of cupro- nickel. The temperature depends on the power and application. Please make
Isopad IS-KTeS is a preterminated PTFE insulated heating cable suitable for use where no excessive mechanical loads are expected and moisture may be present.
This flexible and easily installed cable provides inexpensive and versatile heating. Applications include heat tracing of pipes, small containers, tools, machines, extremely thin and short pipes, and
Isopad IT-TeMS is a preterminated and flexible heating tape. IT-TeMS 2 is used in applications ranging from simple frost protection to temperature maintenance on short pipework and apparatus as well as for general container heating applications.If more power is required, the use of the TeMS 4 or TeMS 6 heating
Isopad IT-ITW/SS preterminated resistance heating tape is specially designed for application in temperatures up to 200°C. The temperature depends on the power and usage. Please make sure that the heating tape does not exceed the maximum withstand temperature.
These highly flexible tapes can be easily coiled around pipelines and valves, supports,
Isopad IT-G25 type is a factory-terminated heating tape constructed from resistance foil or wire heating elements.
The elements are stitched into a total of six layers (three per side) of glass tape, which acts as a carrier.
These tapes are suitable for indoor use or areas where there is no risk
Isopad IS-SP is a preterminated, very flexible heating cord consisting of a glass silk insulated, flexible fabric weave with interior heating conductors. IS-SP-H is a higher temperature variant and SP-V is made with a central core to the spiral heating element.
The temperature depends on the power and application. Please make
Isopad IT-S20 is a preterminated, flexible heating tape with a copper-tinned outer braiding serving as a protective earth braid. The temperature depends on the power and application.
Please make sure that the heating tape does not exceed the maximum withstand temperature.
This heating tape enables maximum power to be installed even in
Isopad IT-ITH is a factory-terminated heating tape with go-and-return series resistance heating elements. They are suitable for high temperature applications in indoor locations or areas where there is no risk of moisture ingress.
It is electrically insulated with a silicone varnished glass braid and the heating element is enclosed in a
Isopad IT-H heating tape is suitable where high power input is needed or where work has to be carried out at high temperatures.
The high-quality quartz glass allows a working element temperature of up to 900°C. This tape should only be used in dry atmospheres with additional electrical protection and always
Isopad IT-CCH crankcase heating cables are designed to prevent motor damage and maintain efficiency by minimizing refrigerant gas absorption into the compressor oil. Their self-regulating properties ensure energy-efficient heating, with no requirement for thermostat control and no risk of overheating. Crankcase heating cables are constructed with a high-powered self-regulating core,
Isopad IT-KDL heating cables are specifically designed for internal and external heating of refrigeration drain-lines and freezer doors. KDLs are constructed from silicone rubber, making them water resistant, and are supplied factory terminated in standard lengths. IT-KDL-SRs are specially produced in a small round form, making them very flexible and