GW Mica Band heaters are constructed by using a resistance element wounded around a sheet of mica, insulated on both sides with mica, and then a sheet stainless steel is folded around the composite layers of mica. Electrical connections are made through post terminals or insulated or heat resistance over-braided
GW Ceramic Insulated Band Heaters are constructed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire. This construction allow the inside surface temperature to reach approximately around 1200ºF. The most common applications include plastic injection moulding machines extruders and blow
GC-coil coil heaters offer a high electrical heating performance in various cross-sections and sizes which can be fitted in the tightest of spaces with operating temperatures of up to 750° at the heater sheath. The minimum bend radius from 3.0 to 10.0 mm (depending on cross-section) not only allows the
GW mica strip heaters are constructed by using a resistance element is wound around a sheet of mica, insulated on both sides with mica, and then a sheet of coated steel is folded around the composite layers of mica. Strip heaters are used in a wide variety of industrial applications.
Silicon Rubber Flexible Heaters are durable and lightweight flexible fiberglass blankets offer fast, efficient heat transfer to your parts with less energy expenditure.
GW ceramic Strip heaters are an excellent way of using surface area to transfer heat effectively. The heater consists of coiled nickel-chromium wire, properly centred and imbedded in a high grade refractory material (special ceramic formula) which insures good insulation and rapid transfer of heat. Steel strip heaters can easily
GW custom designed and manufactured cartridge heater to suit most industry application with quality and technical assurance. With premium materials and tight manufacturing controls, GW's cartridge heaters provide superior heat transfer, uniform temperatures and resistance to corrosion. GW has several metal alloys used as the sheath depending on the type
Anti-Condensation Heaters are with simple and highly reliable DIN rail mounting is designed for two fundamental applications. Firstly, to maintain the temperature of an electrical enclosure at a level suitable for the components contained within. In principle this tends to be for frost protection by keeping the internal ambient temperature
BJC Drum Heaters provide an easy, efficient, clean & economical way for the handling of viscous or low melting point solidified materials in drums. BJC Drum Heaters have an outer layer of insulation to protect the user and to increase energy efficiency as significantly less heat is lost to the
Silicone Rubber Laminated Heavy Duty Drum Heaters are electrical resistance heater in blanket form. They are designed to provide a practical efficient means of freeze protection, viscosity control, melting of solids and maintaining materials at elevated temperatures. This heater can save time by heating stored viscous fluid to a pourable
The RACO Drum Heater has been designed for standard 55 Gallon drums containing viscous material, oils, greases, molasses, paint chemicals etc. The Drum Heater can be applied singly or to a maximum of three heaters where a greater heat input is desired. The RACO Drum Heater Consists of a PTFE